If you are searching for Curtains Fixing Installation, this blog is just for you. We know that it can be a daunting task if you need to be made aware of the proper guide to it. Let us provide you with information regarding curtain fixing in UAE. Read till the end to get a maximum understanding of the whole process.
Tools That You Need For Curtains Fixing
Before starting, gather the following supplies:
- Metal measuring tape (Using a cloth measuring tape could result in off results.)
- Paper and a pencil
- a hand saw
- Rod with hardware and mounting brackets
- Use a ¼-inch bit for drywall or a 3/32-inch bit for wall studs while drilling.
- regular screwdriver
Step 1: Measure by Width and Length
Prioritise measuring the width of the window treatment before measuring the length, whenever feasible. Each measurement of the curtain panel’s length terminates at the ground. Window hardware is commonly placed at a distance of one to three inches above the window frame in outdoor installations. Determine the width of the window molding’s horizontal outer margins. Measure the top, middle, and bottom of the window with precision to the nearest 1/8-inch. Your window width should be the largest measurement. To determine the dimensions of the wall, lightly sketch the contour with a pencil.Â
Utilize the pencil marks to elevate the rod in a vertical position against the wall. Mark the wall-mounting positions with a pencil once you have securely attached the brackets to the rod. The brackets should extend two to four inches beyond the sides of the windows in terms of width. The height of the bracket is determined by the length and style of the curtain. When using a treatment, ensure there is enough space for drapery rings to hang down. To allow the curtains to fully cover your window, increase its width by six to eight inches.
Step 2: Drilling Holes
For curtains fixing installation firmly attach bracket screws to wall studs, use a 3/32-inch drill bit; for drywall, use a ½-inch bit. Plastic anchors are the way to go for fastening drywall screws. The plastic anchors must be completely submerged once the drywall hole is drilled. The plastic anchors will next be screwed into place.
Step 3: Install the Brackets
The mounting brackets can be fastened to the wall by lining up the screw holes on each side. To install the bracket screws, use a regular screwdriver. Before you screw everything in place, check that the rod fits snugly into the brackets.
Step 4: Cut Your Rod to Length
Get the rod to the precise length you want by adjusting it. It is ideal for the item to protrude by at least an inch or two beyond the perimeter of each bracket.
After cutting the rod, make a tiny hole in the middle of the cut section to make connecting the rod end finial easier. To fasten the rod, place it on top of the brackets.
Step 5: Choose Your Desired Fabric Length
As a general rule, window coverings are typically hung at the following lengths: C, just below the sill, E, midway between the sill and floor, and F, all the way to the floor. Standard lengths for curtain and drapery panels are 63,84,95,108, and 120 inches. Your final duration choice will be affected by both internal and external elements, such as your personal preferences and the mood of the surrounding area.
Contact Us For Curtain Fixing Near Me
If you are looking for the assistance of some professionals, you can contact us for Curtains Fixing Installation today. We have the best team who can assist you in this regard. Our services are the best in town and we do not cost unnecessarily. Thus, you do not have to empty your bank account to get our services. The list of our happy and satisfied customers is very long. You can rest assured of us and the services we provide. We at Window Curtains Dubai provide the best service for curtain fixing installation. So, do not wait a single moment and contact us today. Also, free feel to contact us for any query. Our team of experts will be happy to help you with curtain fixing Ajman!
